An ash catcher sits between the bowl and the bong, so it collects ash and resin before the main piece does. Most guides say to shake it in isopropyl alcohol and salt. You can skip both: take the ash catcher off, cover it completely in an alcohol-free soak cleaner, then rinse. Green Piece is an alcohol-free, biodegradable, Made-in-USA soak cleaner.
How to clean an ash catcher, step by step
- Take the ash catcher off the bong and dump out any water and ash.
- Rinse it with warm water to flush out loose ash.
- Set it in a small container or a sealable bag, or plug both joints with silicone plugs.
- Pour in enough Green Piece to cover the whole ash catcher, including the inner tube and any percolator inside it.
- Let it soak. Light buildup usually comes clean in a few minutes. Heavy, caked-on resin needs more time, and hot water speeds it up.
- Shake or swirl it gently now and then so the cleaner moves through the inner chamber.
- Use a nylon tube brush or pipe cleaner on the joints and any spot you can reach.
- Pour the cleaner back into the bottle, rinse the ash catcher well with warm water, and let it air dry before you put it back on.
Wet and dry ash catchers
A wet ash catcher holds water and often has a small percolator, so resin builds up in narrow slits a brush cannot reach. Fill it high enough to cover the percolator and give it the longest soak. A dry ash catcher has no water, so it mostly collects ash and sticky resin around the joint. A shorter soak and a brush on the joint usually do it.
Green Piece is a citrus and mineral-based formula made with orange peel extract, with a fresh orange scent. It is safe on glass, colored glass, quartz, metal, plastic, silicone, ceramic, and acrylic.
Buy Green Piece 16 oz on Amazon. More: How to Clean a Percolator Bong and Hard-to-Reach Downstems Without Alcohol, How Often Should You Clean Your Bong?, and the natural bong cleaner guide.
This is not medical or smoking advice. Keep the cleaner out of reach of children. Rinse the piece well before the next use.
Frequently asked questions
How do you clean an ash catcher without alcohol?
Take it off the bong, empty it, and rinse with warm water. Cover it completely in an alcohol-free soak cleaner such as Green Piece, let it soak, and shake it gently now and then. Brush the joints, then rinse well with warm water and let it air dry.
Do you need salt to clean an ash catcher?
No. Salt and isopropyl alcohol is one common method, but an alcohol-free soak cleaner does not need salt. The cleaner does the work while it soaks.
How do you clean an ash catcher that has a percolator?
Fill it high enough that the cleaner covers the percolator, not just the bottom. Give it a longer soak than a dry ash catcher, swirl it now and then so the cleaner moves through the slits, then rinse well.
How often should you clean an ash catcher?
Change the water in a wet ash catcher every session, and soak it at least as often as the bong itself. It collects resin faster than the main piece.
Can I clean the ash catcher and the bong in the same soak?
Yes. Take the ash catcher off and soak it in its own container while the bong soaks, or soak them one after the other. Green Piece can be poured back into the bottle and used again until it gets too dirty.