Short answer: Most robot mower makers say to replace the blades every few weeks to every few months, depending on the brand and how much your mower cuts. Husqvarna says Automower main disc blades typically last 3 to 6 weeks under normal conditions, and EdgeCut disc blades 9 to 12 weeks. Mammotion recommends about every 3 months or 150 hours of use. Roborock recommends new blades and screws every 1 to 2 months. Replace them sooner if the grass tips look frayed or whitened, or if a blade is chipped, bent or worn. Always follow your own mower’s manual.
Replacement intervals by brand
| Brand | What the maker says | Source |
|---|---|---|
| Husqvarna Automower | Main disc blades typically 3 to 6 weeks; EdgeCut disc blades 9 to 12 weeks. Replace the screw each time, and don’t mix new and old blades. | Husqvarna support |
| Mammotion (Luba, Yuka) | About every 3 months or 150 hours; more often in thick grass. Replace all screws at the same time, and don’t use an electric screwdriver. | Mammotion |
| Roborock | Blades and screws every 1 to 2 months. The app’s maintenance timer is a reminder, not a rule. | Roborock Help Center |
Intervals as published by each maker, checked November 16, 2026. Other brands publish their own schedules, so check your manual.
Signs your blades are due
- Grass tips look frayed, torn or whitened after mowing.
- A blade is chipped, bent, cracked or worn smooth.
- The mower is louder than usual or vibrates.
- The cut looks uneven or streaky.
Spring growth, sandy soil, sticks, stones and toys on the lawn all wear blades faster. A quick look under the mower every week or two catches most problems early.
How to change robot mower blades
- Switch the mower off (and follow your manual for disabling it). Put on cut-resistant gloves.
- Turn the mower over onto a soft, clean surface.
- Remove each old blade and its screw. Brush away clippings and dirt.
- Fit each new blade with a new screw, using a hand screwdriver.
- Replace all the blades at the same time so the disc stays balanced.
- Check that every blade pivots freely before you run the mower.
Keep a spare pack on hand
If your mower needs new blades every few weeks during the season, a multi-pack saves trips. Green Piece sells 30-packs of replacement blades with screws. Fit lists are our own seller claims from the Amazon listings, not approvals from any mower maker. Husqvarna recommends original Husqvarna blades and screws, and other makers have their own guidance. Before you order, measure your current blade (length, holes, thickness) and compare it with the blade fit chart.
- Extra-long stainless steel, 30-pack with screws (single-disc mowers on our list, including Husqvarna Automower, Gardena, Segway Navimow, Yard Force and Flymo 1200R): Buy on Amazon
- Titanium-coated stainless steel, regular size, 30-pack with screws (0.75 mm thick; same single-disc list): Buy on Amazon
- Mammotion Luba and Yuka, 30-pack with screws and plastic washers (dual-hole blades): Buy on Amazon
- Anthbot, 30-pack stainless steel with screws: Buy on Amazon
Two-disc mowers such as the Ecovacs Goat A3000 are not on any of these lists. Don’t order for them.
See all packs: Robot lawn mower blades.
Frequently asked questions
How often should you replace robot mower blades?
It depends on the brand and how much your mower runs. Husqvarna says Automower main disc blades typically last 3 to 6 weeks, Mammotion recommends about every 3 months or 150 hours, and Roborock says every 1 to 2 months. Replace them sooner if the grass tips look frayed or the blades are damaged.
How do I know my robot mower blades are dull?
Look at the lawn. Frayed, torn or whitened grass tips after mowing are the clearest sign. Also check for chipped, bent or worn blades, extra noise or vibration, and an uneven cut.
Should I replace all the blades at once?
Yes. Makers such as Husqvarna say not to mix new and old blades, because it can unbalance the cutting disc and cause noise or vibration.
Do I need new screws every time I change blades?
Yes. Husqvarna says to replace the screw each time, and Mammotion and Roborock also say to replace the screws with the blades. Reused screws can let blades come loose.
Can I sharpen robot mower blades instead of replacing them?
Makers treat robot mower blades as a consumable part and say to replace worn blades. They are small and inexpensive, so replacing them is the usual advice.
Are Green Piece blades original parts?
No. Green Piece blades are third-party replacement blades. The fit lists come from our own Amazon listings and are not approvals from any mower maker. Measure your blade and check the fit chart before you order, and follow your mower maker’s guidance.